Dave2302 387 Posted December 23, 2018 FFS Sort it out How complicated can it be, just imagine 3 Briggs and Strattons joined together It's minus one "Bang" is it getting Juice, is it Sucking, is it Squeezing, is it Blowing, is it Sparking ...................... Jesus, even Benji's bird in the Matalan Frock down the "Dog and Duck Karaoke" can get Juice, Suck, Squeeze, Bang and Blow, and all in the same 10 minutes And she didn't drop her Kebab & Chips 1 Share this post Link to post Share on other sites
Del Boy 76 Posted December 23, 2018 30 minutes ago, Dave2302 said: Jesus, even Benji's bird in the Matalan Frock down the "Dog and Duck Karaoke" can get Juice, Suck, Squeeze, Bang and Blow, and all in the same 10 minutes And she didn't drop her Kebab & Chips Hahaha Share this post Link to post Share on other sites
AutoJacob 34 Posted December 23, 2018 20 hours ago, have a word with the wife said: what is this ? as i suggested / asked earlier, have you changed the map sensor ? why ? because the vacum control valve is NOT the map sensor ........... Changed map sensor and no difference.. I'm thinking that the exhaust might be blocked as at low revs it's fine only when under load / high revs does it misfire. Share this post Link to post Share on other sites
have a word with the wife 299 Posted December 23, 2018 42 minutes ago, AutoJacob said: Changed map sensor and no difference.. I'm thinking that the exhaust might be blocked as at low revs it's fine only when under load / high revs does it misfire. borrow a vacum gauge, gauge slowly reading down indicates a blocked exhaust or a fault in the cat BUT a blocked exhaust would not give a misfire, not used jump pack have you ? Share this post Link to post Share on other sites
Stalker 180 Posted December 23, 2018 Get a multimeter on those injectors Share this post Link to post Share on other sites
AutoJacob 34 Posted December 23, 2018 1 hour ago, Stalker said: Get a multimeter on those injectors Have done all reading 12.5 ohms 23 hours ago, have a word with the wife said: what is this ? as i suggested / asked earlier, have you changed the map sensor ? why ? because the vacum control valve is NOT the map sensor ........... Changed map sensor and no difference.. I'm thinking that the exhaust might be blocked as at low revs it's fine only when under load / high revs does it misfire. 1 hour ago, have a word with the wife said: borrow a vacum gauge, gauge slowly reading down indicates a blocked exhaust or a fault in the cat BUT a blocked exhaust would not give a misfire, not used jump pack have you ? Ok I'll see what this brings and nope not had to jump it. Share this post Link to post Share on other sites
have a word with the wife 299 Posted December 23, 2018 1 minute ago, AutoJacob said: Have done all reading 12.5 ohms Changed map sensor and no difference.. I'm thinking that the exhaust might be blocked as at low revs it's fine only when under load / high revs does it misfire. yes you said once already Share this post Link to post Share on other sites
AutoJacob 34 Posted December 23, 2018 1 minute ago, have a word with the wife said: yes you said once already Haha I know it seems to have embedded it's self in my latest reply. I've managed to delay hand over until after Christmas so if it needs an engine then it gets an engine.. we will check the exhaust tomorrow morning. Fed up who would have thought these little tin can cars would be so complex. I've been told it may potentially be an ECU fault which shuts down the injector in Cyl 3, however it seems to be very rare. Share this post Link to post Share on other sites
Stalker 180 Posted December 23, 2018 Have you got a set of injector noid lights? Share this post Link to post Share on other sites
It's me 615 Posted December 23, 2018 (edited) During the war when we were stuck in the desert the only tools we had were a Manchester screwdriver and a vacuum gauge these two tools saved us and we got a Victoria cross sandwiches medal,so the moral of the story is vacuum gauge before noid ,think about it what tool is more versatile,answer none but the Manchester screwdriver draws a close second if the gauge fails to deliver...........just sayin Edited December 23, 2018 by boring dave Spilling mistoke Share this post Link to post Share on other sites
DPF 18 Posted December 23, 2018 Hopefully you solve the problems with new Ecu. Share this post Link to post Share on other sites
AutoJacob 34 Posted December 29, 2018 Bit the bullet and put an engine in it, runs and drives fine now. Going to take the head off the old engine and see what caused the ruckus. Share this post Link to post Share on other sites
Tom 164 Posted December 29, 2018 6 minutes ago, AutoJacob said: Bit the bullet and put an engine in it, runs and drives fine now. Going to take the head off the old engine and see what caused the ruckus. Be interesting to see! Share this post Link to post Share on other sites
It's me 615 Posted December 29, 2018 14 minutes ago, AutoJacob said: Bit the bullet and put an engine in it, runs and drives fine now. Going to take the head off the old engine and see what caused the ruckus. poor servicing,wrong oil,blocked vari cam? Share this post Link to post Share on other sites
AutoJacob 34 Posted December 29, 2018 (edited) 43 minutes ago, boring dave said: poor servicing,wrong oil,blocked vari cam? Already serviced it before it went on the pitch.. gutted wasted some valuable 10-40 on that piece of shit broken engine Edited December 29, 2018 by AutoJacob Share this post Link to post Share on other sites
New year revolutions...... 197 Posted April 22, 2020 On 12/22/2018 at 10:07 AM, justina3 said: I did that in an auction once my head would not stop bleeding for ages, had to stand in the auction with a load of toilet paper holding my head together. You would have to pay for such a privilege these days Can we start at £1 a sheet ladies and gentlemen Come on now,I have an internet bidder at £2 and buyer can stand on for all the 44 sheets Can we say 3? Share this post Link to post Share on other sites
Stalker 180 Posted April 23, 2020 On 12/29/2018 at 5:22 PM, LINGSzCARS said: poor servicing,wrong oil,blocked vari cam? 8 hours ago, New year revolutions...... said: You would have to pay for such a privilege these days Can we start at £1 a sheet ladies and gentlemen Come on now,I have an internet bidder at £2 and buyer can stand on for all the 44 sheets Can we say 3? Hey @New year revolutions...... .... did you not notice........@boringdave aka JasonDoyleMotors.... etc..... changed his name to @LINGSzCARS Share this post Link to post Share on other sites
Umer 5 Posted April 25, 2020 Did you ever fix it at the end? Thanks Share this post Link to post Share on other sites
Casper 272 Posted April 26, 2020 8 minutes ago, Umer said: Did you ever fix it at the end? Thanks He changed the engine from a breaker Share this post Link to post Share on other sites
Umer 5 Posted April 26, 2020 6 minutes ago, Casper said: He changed the engine from a breaker Oh okay I see, Thanks Share this post Link to post Share on other sites
Casper 272 Posted April 26, 2020 48 minutes ago, Umer said: Oh okay I see, Thanks No probs welcome Share this post Link to post Share on other sites
