Sign in to follow this  
Pip

Misted up headlights

Recommended Posts

Just taken a Corolla in p/x and the headlights were the worst I’d seen, nearly yellow in fact and advisory on MOT. Tell me if anyone has tried this, I’m sure you have , and in a few days I will be back to square one. Well ten minutes elbow grease and a bottle of metallic t cut and these lights are shining like new. Always heard about the kits you can get for 30 quid and so on but at the moment they look new. Will they last ?

Share this post


Link to post
Share on other sites

have done this in the past and it lasted a few days before returning to a misted look.  Now depending on the extent, I either get the Autoglym kit and do them or if really bad send them to my smart repair guy.

I found the Autoglym kit to be really simple to use and usually lasts through the next few MOTS .

Share this post


Link to post
Share on other sites

Thought so, as they say if it seems too good to be true it often is.

Share this post


Link to post
Share on other sites

As always it depends on your stock profile. 10 minutes with the G3 & the MOP does a good enough job on my stock - it brings them back to about 85-90%.

I’ve seen a colleague MOP them, then manually rub down with fine (1200 grit I think) sandpaper, then rebuff again with the MOP & half an hour later they looked like new. 

To be honest, even if you don’t possess a polisher then some G3 on a rag & 15 minutes of elbow grease will improve them which is good enough on an old banger like a corolla.

Share this post


Link to post
Share on other sites

As a quick fix a wipe over with DoT3 brake fluid on a cloth will remove the yellow (yes, really!) and then a polish will bring them up good enough.

For a proper job start with 300 grit paper, work up to 2000 grit. Then few coats of lacquer to finish and protect against UV (ideally 2K, but 1K works too).  That should last a couple of years.

Share this post


Link to post
Share on other sites

It's the plastic lense anti UV covering that yellows, so you need to remove that aged layer, wet n dry, G3, handful of gravel etc. 

....the worst for going yellow were those MK1 Mondeos, they looked like my piss first thing Saturday morning after a heavy Friday night. 

......talking of which, I can't remember the last time I saw a MK1 or MK1 facelift Mondeo, all bangered and made into baked bean cans now. 

Share this post


Link to post
Share on other sites
39 minutes ago, Frank Cannon said:

......talking of which, I can't remember the last time I saw a MK1 or MK1 facelift Mondeo, all bangered and made into baked bean cans now. 

Oddly enough I saw one last week - but it was the first one I’ve seen in years.

There’s also someone local who uses a 30yr old Maestro. It’s just a scruffy user, what a strange choice for a daily driver. 

Share this post


Link to post
Share on other sites

Oddly enough, on my way to collect parts, had an X plate white Mondeo (last of) with collapsed rear springs in front of me....typical :D

Looked soooooo small compared to todays D segment cars

Share this post


Link to post
Share on other sites
On 6/14/2020 at 12:23 PM, New year revolutions...... said:

only way is to rub them down with 1200 them 2000 then buff with an electric wheel and compound

for long term you could then mask up and lacquer the lenses

Like stated above , they do need coating for longer term protection , I've used Concept Vista on them before , Autosmart do one similar or those expensive lil bottles of Si02 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this