Walsall 0 Posted June 23, 2019 Hi, Guys hope your well.... Just need some Advice, I currently have 2017 Ford Focus 1.5 Tdci Zetec. Were in the Process of Carrying out a Full St3 Conversion. My main Question is will a St 3 Exhaust from a 2.0 Petrol Fit My 1.5 Tdci? My Bumpers will all be St3 prior to this installation. Many thanks In Advance, Adam Share this post Link to post Share on other sites
David Horgan 564 Posted June 24, 2019 On 23/06/2019 at 3:32 PM, Walsall said: Hi, Guys hope your well.... Just need some Advice, I currently have 2017 Ford Focus 1.5 Tdci Zetec. Were in the Process of Carrying out a Full St3 Conversion. My main Question is will a St 3 Exhaust from a 2.0 Petrol Fit My 1.5 Tdci? My Bumpers will all be St3 prior to this installation. Many thanks In Advance, Adam So you want to put a Petrol ST exhaust on a Diesel ? Cant see that fitting Share this post Link to post Share on other sites
MarkTVS 209 Posted June 24, 2019 2 hours ago, tradex said: If it did it would bloody noisey, diesel exhausts have a lot more sound deadening than a petrol Your slightly mistaken, diesels are quieter than petrol hence why people never notice their cars exhaust blowing when it’s diesel Share this post Link to post Share on other sites
MarkTVS 209 Posted June 24, 2019 But anyway to the original poster I very much doubt it would be a direct fit you should have some mechanical knowledge and I’m sure you could sleeve it without too much difficulty. I assume a petrol st will have a large centre bore than a diesel. Share this post Link to post Share on other sites
JA Trader 58 Posted June 25, 2019 I see your in walsall there is a good exhaust shop we use a lot on the outskirts of the city centre. Not sure if im allowed to say the name on here but fee free to pm me and i will pass the details over Share this post Link to post Share on other sites
It's me 615 Posted June 26, 2019 dont see the point really dont Share this post Link to post Share on other sites
