Ford Ka Mk2

[metcars 395]

Before I 'have at it' with a screwdriver, can some kind soul tell me how the radio surround come out!

Cheers

[It's me 612]

ive taken them out but forget

i think theres a fastener underneath?

nasty radios they keep going faulty plus the words wear off

its a bluespot so i should be able to do the code if you get stuck after replacing,if just taking out and putting back in it should work without code need

[metcars 395]

5 minutes ago, boring dave said:

ive taken them out but forget

i think theres a fastener underneath?

nasty radios they keep going faulty plus the words wear off

its a bluespot so i should be able to do the code if you get stuck after replacing,if just taking out and putting back in it should work without code need

No, the buttons have worn and look nasty. I thought it might be a good candidate for 'banging tunes'. I've seen a few replacement fascias on ebay but just wondering how you get them out

[Marc 6]

I've done this a few times ,replacing heater dial bulbs while I'm at it.

I used precision screw drivers but dedicated tool would be better.

Pop the plastic surround off the circular air vents and rotate, pull it out a tad and rotate,should come straight out. 

Better if you have keys to remove stereo but again I used slim precision screwdriver. Start at one side, push screwdriver/key in far as it will go and push to left,feel it 'give' and ease it forward a little..same for other side.