Alfa MiTo Gearbox Repair/Replace

[D&M 66]

Hi All,

We've got a little MiTo in at the moment - its the 1.4 16v 95BHP Non Turbo model.

The gearbox needs repair/replacement as its very noisy and can't be put into gear unless you're releasing the clutch to make it pop in. Sticks in reverse too!

Easiest option would be a 2nd hand box from a breaker, but wondering if anyone here could recommend a gearbox guy to try.

Thanks!

[Dave2302 387]

I used to own a Transmission Firm ..................

If you can get a good used box, just go that route

Make sure it is an identical model etc

[Row 71]

1 hour ago, D&M said:

Hi All,

We've got a little MiTo in at the moment - its the 1.4 16v 95BHP Non Turbo model.

The gearbox needs repair/replacement as its very noisy and can't be put into gear unless you're releasing the clutch to make it pop in. Sticks in reverse too!

Easiest option would be a 2nd hand box from a breaker, but wondering if anyone here could recommend a gearbox guy to try.

Thanks!

Got a great repair guy in Leeds if that's any good for you D&M

Edited September 9, 2020 by Row

[David Horgan 564]

Gear box man in Mansfield Woodhouse . Hes good . 

 

[D&M 66]

Thanks all for your replies - sorry its taken so long to get back.

We're going down the easier (and cheaper!) route of getting a second hand box fitted.

After a fair bit of searching, and not finding any gearboxes with the same part number it seems that any 6 Speed Fiat gearbox from a 1368 16v engine will work with the MiTo, so Grande Punto/Punto Evo/500/Panda 100HP etc. The part number seems to have no effect on the actual fitment of the box, just depends on which version as Fiat made so many updates to it, so as long as it comes out of a same age or newer car, it'll be grand.

Thanks again