Boydy1985 0 Posted April 18, 2018 Hi guys, Quick question, I have a Jaguar XF 2.7D bringing up restricted performance. Ive plugged it in and it brought up EGR Fault. We have replaced both EGR Valves, then we got them both deleted and blocked as code was still coming up. Even after all this its still bring up codes P2141 + P2142 relating to EGR valves? Any Help Much Appreciated Share this post Link to post Share on other sites
Stalker 180 Posted April 18, 2018 I’m not an expert on these, but even when you map them out the wiring and valves still need to be good from memory? I think a sticking egr is ok but a electrically failed one won’t work. The code perhaps relates to a flap/throttle. Do these have a flap that closes and draws more egr gases? Share this post Link to post Share on other sites
Boydy1985 0 Posted April 18, 2018 Hi thanks for reply, Yes correct it keeps coming up EGR Throttle fault, I have replaced the throttle Body also and all wiring looks good! Heads fried with it, We have a deposit on it and customer is going to kick if we cant get it fixed! Share this post Link to post Share on other sites
Stalker 180 Posted April 18, 2018 2 minutes ago, Boydy1985 said: Hi thanks for reply, Yes correct it keeps coming up EGR Throttle fault, I have replaced the throttle Body also and all wiring looks good! Heads fried with it, We have a deposit on it and customer is going to kick if we cant get it fixed! Is that the flap in the y piece of pipe on the top of the engine? the actuator bolts on separately, can you see it moving? Share this post Link to post Share on other sites
Boydy1985 0 Posted April 18, 2018 Yes ive replaced this unit including MAP sensor! Share this post Link to post Share on other sites
Dealer 54 Posted April 18, 2018 Check all air intake pipes for loose conections or splits, i had one of these a few months ago, same code, restricted performance message on dash etc, found it was a pipe off giving an incorrect reading Share this post Link to post Share on other sites
Stalker 180 Posted April 19, 2018 11 hours ago, Boydy1985 said: Yes ive replaced this unit including MAP sensor! Does the code clear and come straight back without starting the engine? Share this post Link to post Share on other sites