FASTANDFURIOUS

Members
  • Content Count

    5
  • Joined

  • Last visited

Community Reputation

1 Neutral

About FASTANDFURIOUS

  • Rank
    Newbie

Profile Information

  • Your industry
    Franchised dealer
  • Dealership/company name
    performance prestige

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Can you guys believe that it was dodgy sensors sold by a Land Rover Indy. One sensor was showing faulty so I replaced that one first then when it didn’t work I replaced all of them, and that still didn’t work, switched them with my mates and all of a sudden it worked
  2. It’s a 2014 Range Rover sport one trouble code is J_14229_DTC_C1D21- I’ve just had all 4 changed with new genuine tpms from an indy and one that’s just developed but went away is U201F-87 I just want to disable it temporarily as it’s very annoying as it comes up every few seconds- would never sell a car with something like this disabled lol I’ve put in all new SEnsors from an independent Land Rover specialist and they aren’t working. Before I switched over the sensors I was able to do a tpms test on SDD which allowed me to read the values each tpms was relaying back to the car, it was only the driver front that showed as having 255 psi so I changed that one first but with no luck I then changed all of them and now I can’t even run a tpms test as it tells me to take it for a drive cycle and then return and retry, I’ve done 100+ miles on road testing and I’ve manually inputted the sensor identification numbers in SDD and it was accepted but I still have the warning light... oh and the tyre shop broke off the old sensors so I can’t put them back in lol
  3. I’ve replaced the tpms sensors, coded them through SDD and no luck I’m trying to find where the tpms module is now but I’ve had no luck all initiators seem fine Don’t you think I’ve tried to fix it already? as dealerships are closed other people in the trade may be able to help me out... idiot
  4. I have engineering mode but it’s greyed out when I hover over tpms my understanding is that you need to edit it by hex or someone with a genesis/ nanocom login will be able to do it quick and easy through the genesis website
  5. Hi I'm new here but was wondering if anyone could help me out and disable tpms by editing my ccf file, I have SDD but not the knowhow on how to do it, It's my personal car and its driving me mad I cant find the problem